Hello friends!
Today we have a very interesting and much-anticipated post about the Tiguan with a 2.0 180hp engine! But not the usual Stage 1 or 2 for many, but Stage 3 based on the is20 turbo from the 2.0 220hp engine!
⚡️Now we officially offer Stage 3 — a ready and tested solution for this engine operating on the Miller cycle (CVKB, CZPA, CZPB, etc.) ⚡️
Let's go in order:
The owner of the Tiguan — Alexey contacted us last year for tuning a configuration that was not widespread at that time on the is20 from the 2.0 220hp engine, in advance before tuning, a downpipe and intercooler from Golf R were installed in addition to the is20 turbo, the car showed a decent result in 30-degree heat, the owner went to test the new power, and we continued to refine and test the software together with Alexey, as well as other cars in Russia and other countries! And now, almost a year later, we are pleased to present you with a ready solution for upgrading cars with a similar engine to Stage 3 is20, below are the measurements of characteristics and dynamics!
Of course, everyone had a question: How does the Tiguan 2.0 180hp drive on Stage 3 from Etuners?🧐
We answer: Amazingly! 😉
And as usual, here is the power measurement graph and measurements with Dragy!
In stock, the car produces power: 180 hp and 320 Nm
After Stage 3 upgrades: 340 hp and 500 Nm
0-100: ⚡️4.88 sec ⚡️
100-200: ⚡️15.49 sec⚡️
This solution is also relevant for Kodiaq 2.0 180hp, Octavia A8, and any other car with this engine 💪
If you have any questions, you can always ask us in the comments, personal messages, or by phone +7-495-481-33-31
Until we meet again!🔥
Stay tuned!
